UNIT MANAGEMENT
PAGE 9
Control Settings Reference
• Record Deactivation: Allows you to preset how long
the record will be active.
• None: Records never expire.
• Fixed: Allows you to set a date when records will
become inactive.
• System Generated: Allows you to set the number of
days (from the date the record was created) before it
becomes inactive (1-1000 days, default: 30).
• Talk Time: Sets the number of seconds the visitor is
allowed to talk with the tenant (15-250 seconds,
default: 60 seconds).
• Max Visitor Call Rings: Sets the number of rings
(1-9) the unit will allow before it cancels a visitor call to the residence (default: 5 rings).
• Directory Code: Sets the directory code length to 1 or 2 digits. Decreasing the number of digits may make longer
directory codes invalid.You will need to change the longer directory codes to fit the shorter directory code length
(default 2 digits).
• Entry Code: Sets the entry code length between 3 and 9 digits. Decreasing the number of digits may make longer
entry codes invalid.You will need to change the longer entry codes to fit the shorter entry code length (default 4
digits).
• Strikes and Out: Sets the maximum number of allowable keypad errors. The Strikes and Out feature prohibits
unauthorized persons from guessing an entry code or unit password. Anyone entering an entry code or unit
password will have a set number of times to correctly enter his/her code. Each time the code is entered
erroneously, it is a “strike”. After x number of “strikes”, the system will not allow code or password entry at the unit
for 3 minutes (default: 3 attempts). Note, the system will still allow program entry from other sources (i.e. remote
location).
• On Hook Threshold Count: Sensitivity of unit to detect On-Hook from resident phone.
• Off Hook Threshold Count: Sensitivity of unit to detect Off-Hook from resident phone.
• Speaker Level: The speaker enables the visitor to hear the resident at the unit. If the speaker’s volume is too low
or too high, you may adjust it accordingly. (1 is low; 10 is high; Mute = 0: Default = 5).
• Microphone Level: The microphone receives and transmits the sounds/speech from the unit to the resident. If the
sounds are indistinguishable, or the residents are having difficulty hearing the visitor’s speech, you may adjust the
microphone volume. (1 is low; 10 is high; Mute = 0: Default = 5).
• Enable Anti-Passback: The Anti-Passback feature deters someone from “passing back” his/her access code/card
to unauthorized individuals so they can gain entry into a restricted area.
1. Timed: Requires residents to wait a defined period of time before using the same access code (card, entry
code, etc) again on the same entry device (reader, keypad, etc.). Time can be set between 1-60 minutes
(default: 3 minutes).
2. True: Requires residents to exit before entering again (and vice versa).
• Reset Credentials @ Midnight: If True anti-passback is enabled, this setting will “reset” all access codes (cards)
at midnight.
• Access Granted Beeps: When enabled, the system will respond with short beeps when the unit grants a resident
entry. However, you can disable the sound if the beeping will be disruptive to others such as a resident living or
working nearby (default: Enabled).
(30 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern